TRIPP LITE B126-1A1-U-MCRO - Tripp Lite Micro-HDMI to HDMI over Cat5/Cat6 Active Extender Kit 1080p @ 60 Hz USB Powered

The transmitters built-in Micro-HDMI cable connects to the audio/video source and the receivers built-in HDMI cable connects to the display. Cat5e/6 cable connects the two units (for best results use 24 AWG solid-wire Cat5e/6 cable such as Tripp Lites N202-Series). Each unit is powered by an included USB Micro-B to USB-A cable which must be connected between the unit and a USB port on the source display or USB wall charger. You can also connect an optional HDMI monitor to the transmitters local port with a user-supplied HDMI cable such as Tripp Lites P568-Series. The B126-1A1-U-MCRO can extend a 1080p (@ 60 Hz) signal up to 125 feet with full rich stereo. Built-in RJ45 LEDs indicate the units are receiving power and a signal from the source. Built-in equalization control lets you fine-tune the image quality at each remote display. Easy to set up with no software or drivers to install. Works with all operating systems and HDMI sources.