Icy Dock MB982SPR-2S R1 - Ezconvert Pro Full Metal Dual

ICY DOCK EZConvert Pro MB982SPR-2S R1 is a full metal dual drive 2.5" SATA HDD / SSD to 3.5" SATA HDD converter with built-in RAID 0 (FAST) RAID 1 (SAFE) JBOD and BIG functions. The MB982SPR-2S R1 converts 2 x 2.5" SATA hard drives or SSD from 5 - 9.5mm drive height into an exact same dimension screw holes and connector locations of 3.5" SATA hard drive. That's been said with EZConvert Pro MB982SPR-2S R1 you can easily add a 2.5" HDD / SSD RAID array anywhere a 3.5" SATA drive is used such as internal 3.5" drive bay custom build 3.5" HDD slot or pre-existing 3.5" hot-swappable trays without needing to add a RAID controller card and 2.5" drive mounting kit. The MB982SPR-2S R1 has equipped with SATA 3 RAID chipset for maximum performance and it is build by full metal construction for best drive stability. The MB982SPR-2S R1's patented tool-less drive installation design makes drive maintenance easy and cost effective. To add or replace 2.5" drive(s) simply open the top cover of EZConvert and put 2.5" HDD(s) / SSD(s) in the converter and close the top cover and voila! You are ready to go. The EZConvert Pro MB982SPR-2S R1 is designed to maximize the flexibility of 3.5" drive space with minimum downtime and costs. It is suggested for applications that require OS drive redundancy or high IOPS values such as medical & military systems government agencies computers Industrial PCs SMB workstations VM workstations POS systems SFF & mobile systems automation systems and embedded systems. Standalone Built-in Hardware RAID Controller The EZConvert Pro MB982SPR-2S R1 is a self contained hardware RAID 2.5" to 3.5" drive converter that gives you the flexibility to choose between RAID 0 (FAST) RAID 1 (SAFE) BIG and JBOD modes. With its built-in high performance SATA 3 RAID chipset the converter operates independently of your system with its own processor and memory to run the RAID applications offering the next level reliability comparing to software RAID. Software RAID can be infected by viruses and cause the RAID table to be corrupted result in permanent data loss from the drives. With the standalone RAID function you can easily add 2.5" HDD / SSD RAID array into anywhere a 3.5" SATA drive is used via a single SATA connection without the need of an additional RAID controller card or drive mounting kit. For example you can quickly replace your 2012 Mac Pro's 3.5" hard disk drive with 2 x 2.5" drives in RAID 0 array for faster transfer speed or create 2 x 2.5" drives in RAID 1 array to replace the 3.5" SATA HDD in your pre-existing POS system to prevent a downed system caused by unexpected drive failure. The JBOD mode allows you to see two individual drives (requires SATA port-multiple on the host end to detect both drives) and BIG mode provides maximum storage capacity into a single point by combining two hard drives storage capacity sizes into a single large storage volume. The variety of RAID configurations that MB982SPR-2S R1 offer maximize uses for your 3.5" hard drive space the choice is yours!