Altronix ACM8CB - 8 Output Access Power Controller Module

ACM8CB converts one (1) 12 to 24 volt AC or DC input into eight (8) independently controlled Class 2 Rated Power Limited PTC protected outputs. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System Card Reader Keypad Push Button PIR etc. The unit will route power to a variety of access control hardware devices including Mag Locks Electric Strikes Magnetic Door Holders etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. Unit is designed to be powered by one common power source which will provide power for both the board operation and locking devices or two (2) totally independent power sources one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress Alarm Monitoring or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.